How to Start a Toro Lawn Mower

| Updated On: April 8, 2023
As an Amazon Associate I earn from qualifying purchases, this means that at no cost to you.

To start a Toro lawn mower, begin by checking the oil level and filling it up if necessary. Place the fuel tank on a flat surface, then attach the air filter to the carburetor. Next, turn off all controls and place the choke lever in the “Choke” position.

Turn on the ignition switch and pull out the recoil starter handle until you feel resistance. Now set your speed control lever to full throttle and slowly release your grip on the starter handle while pushing down on it at an angle of 45 degrees away from you. The engine should start after doing this three or four times.

When it does, move your speed control lever to slow idle so that your engine runs smoothly before using it for any work around your yard!

Step 1: Prepare the Mower – Before attempting to start your Toro lawn mower, make sure that it is prepared for use. Check the oil level and fill up if necessary. Also, check the fuel tank to ensure that it contains enough gasoline for cutting your lawn

Step 2: Prime the Engine – Most Toro models require you to prime their engines before starting them up. To do this, locate the priming bulb near or on top of the engine, then press down several times until a steady stream of gas comes out of it.

Step 3: Set Throttle Position – Make sure that your throttle setting is in “start” mode before trying to turn on the mower. This can be done by moving a lever located next to where you insert your key into its proper position.

Step 4: Insert Key and Start-Up Mower – Once all preparations are complete, insert your key into its slot and turn counterclockwise until hearing an audible click from within the engine bay area indicating that everything is connected properly and ready for activation.

Then push down firmly on either side of the starter grip handle located at the front wheel well (near the ground) until the blade starts rotating and the motor begins running steadily without any hiccups or stalling moments.

How to Start Toro Lawn Mower With Choke

Starting a Toro lawn mower with a choke is easy. Begin by turning the fuel valve to the “on” position, and then move the throttle lever to half-choke. Next, place your foot on the brake and pull back on the starting cord handle until it is taut.

Finally, pull quickly on the cord handle with one strong motion and release it as soon as you hear or feel an engine response. If necessary, repeat this step until your mower starts running smoothly.

How to Start a Toro Lawn Mower Without Primer

To start a Toro lawn mower without primer, you will need to make sure the fuel tank is full and that there are no air leaks in the fuel line. Additionally, check that all spark plug connections are clean and tight. Once these steps have been completed, turn on the ignition switch to activate the engine’s starter circuit, then pull on the recoil rope until you hear an audible “pop” from within the engine.

This indicates the successful starting of your Toro lawnmower without primer!

How to Start a Toro Riding Lawn Mower

Starting a Toro Riding Lawn Mower is easy and can be done in just a few simple steps. Begin by familiarizing yourself with the controls, located on the right side of the seat. Once comfortable, engage the parking brake and start up your mower by pressing down on either the “start” or “prime/choke” button while pulling back on the ignition switch.

Once you hear your engine running, release both buttons to allow it to idle for a few moments before engaging the transmission lever located next to your left foot pedal and releasing the clutch bar near your right foot pedal. Finally, adjust your speed using either a low or high-gear lever at its highest setting for maximum power!

How to Use Toro Self-Propelled Lawn Mower

Using a Toro self-propelled lawn mower is an easy and efficient way to maintain your yard. To use the mower, start by adjusting the drive control lever to your desired speed. Then, pull back on the starter cord until it engages with the engine, and push down on the primer bulb.

Finally, set your height adjustment knob for either side discharge or mulching mode and begin pushing forward at a steady pace across your lawn.

Toro Recycler 22 Primer Button Location

The primer button on a Toro Recycler 22 lawn mower is located above the left wheel of the lawnmower, towards the back. It should be clearly visible when you look down at the machine from behind. The primer button helps to prime your engine before starting it up and ensures that fuel reaches all necessary components to get your engine running smoothly.

How to Start a Toro Lawn Mower


How Do You Start a Toro Lawn?

To start a Toro lawnmower, begin by checking the oil and gas levels. Make sure there is enough oil in the engine before attempting to start it. Next, open the fuel cap and fill it up with fresh gasoline.

Place your key into the ignition switch and turn it counterclockwise until you hear a clicking sound. Now press down on the primer bulb three times for extra fuel in the carburetor chamber before turning the key all the way clockwise to engage the starter motor. Finally, pull out on recoil rope handle vigorously until the engine starts running smoothly.

How Do You Start a Toro Self-Propelled Lawn Mower?

In order to start a Toro self-propelled lawn mower, first make sure that the fuel tank is full and all connections are secure. Next, engage the parking brake by pushing down on the lever located near your left foot. Then, turn the key switch onto the “Run” position and pull out on the starter rope handle until resistance is felt (usually two or three times).

Finally, give a strong tug to start the engine. Once started, release pressure from the rope handle as quickly as possible so it does not damage engine components.

Why Won’T Toro Lawn Mower Start?

If your Toro lawn mower won’t start, first make sure that the fuel tank is filled with fresh gas and the oil level is sufficient. If this doesn’t solve the problem, check to see if there is a spark in the spark plug by removing it and checking for a spark when you attempt to start it. You can also try cleaning or replacing the air filter as a clogged filter can prevent an engine from starting.

Lastly, inspect all of the hoses connected to your mower’s carburetor for any signs of dirt or debris; these should be cleaned if necessary before attempting to restart it again.

How Do You Start a Lawn Mower for Beginners?

Starting a lawn mower for the first time can be intimidating, but it doesn’t have to be. Before starting your lawn mower, make sure that you are familiar with all safety features and operating instructions. Begin by checking the oil level and fuel tank.

If necessary, add fresh gasoline and oil in accordance with the manufacturer’s specifications. Then inspect the area around the lawnmower for debris or obstructions such as stones or sticks that could potentially harm you or damage your equipment if caught up in the blades.

Once cleared, turn on the ignition switch which is usually located at the top of the engine housing near the handlebars; this will prime the fuel line sending gas from the tank into the carburetor.

Finally, pull the starter cord steadily until the motor begins running – don’t let go too soon!

How to start a Toro lawn mower


Starting a Toro lawn mower can be a simple process if you follow the correct steps. First, make sure the engine is cool and in neutral gear. Then check that all safety switches are on and turn off any fuel shut-off valves.

After that, attach the key to the ignition switch and insert it into its slot. Finally, push down/pull up on the recoil rope handle until you hear an engine start to sound or notice smoke coming out of the exhaust pipe. With these easy steps, you’ll have your Toro lawn mower running in no time!

In conclusion, starting a Toro Lawnmower doesn’t have to be difficult; rather it’s actually quite straightforward when following these few simple steps outlined above. With proper maintenance and care of your mower over time, you should not encounter too many issues with getting it started each season!

Leave a Comment