How to Start a Riding Lawn Mower

| Updated On: July 5, 2023
As an Amazon Associate I earn from qualifying purchases, this means that at no cost to you.

To start a riding lawn mower, first, make sure the parking brake is engaged and the blades are disengaged. Next, insert the key in the ignition switch and turn it to the “on” position. Now check that all safety devices such as shields or guards are securely fastened.

If they’re not, secure them before continuing. Push down on the clutch/brake pedal before engaging the electric start (if equipped). Then press and hold the engine shutoff switch while turning the key to “start”.

Release both switches when you hear the engine running. Finally, adjust the throttle control lever as needed for desired power setting then lift the clutch/brake pedal slowly until it engages with a click and your riding lawn mower has started!

  • Prepare the area: Before you start a riding lawn mower, make sure there are no objects in your way that could be hazardous to you or the mower. This includes sticks, rocks, and other debris on the ground
  • Also, check for any people or animals in the vicinity of where you’ll be cutting grass.
  • Put on Protective Gear: Wear shoes with non-slip soles, thick clothing, and gloves to protect yourself from flying debris while operating the mower and to ensure greater control over its movements
  • A helmet is also recommended if available as it can help protect against potential hazards such as low branches or stones kicked up by the blades of the grass cutter machine
  • Sit on Riding Lawn Mower & Engage Brake: Sit down in a comfortable position and firmly grip both handles of your riding lawn mower then press down firmly on the foot pedal brake located near the left handlebar until it engages completely before starting the engine so that the machine will not run away when being started up
  • Start Engine: Once everything has been prepared, turn the ignition key into the “on” position (or push the button depending on the model)
  • Wait for the fuel pump to prime itself for a few seconds before pulling the starter cord slowly using one hand at full arm’s length until resistance is felt then pull the cord quickly with both hands back towards chest level till the engine starts running smoothly without any hesitation or stalling out noises coming from the motor compartment
How to Start a Riding Lawn Mower


How Do You Start Up a Riding Lawn Mower?

Starting up a riding lawn mower is a fairly straightforward process. First, make sure that the fuel tank has enough gas to run the engine and check for any obstructions around the area where you will be mowing. Next, set all of your speed settings on their lowest setting – this could range from slowest speed to neutral depending on your particular model.

After that, locate the choke lever or button and move it into position for starting; again this depends on your particular model so refer to its owner’s manual if necessary. Finally, turn the key in the ignition switch to start up the engine and then adjust your speed as needed when you begin mowing.

How Do You Start a Choke on a Riding Lawn Mower?

To start a choke on a riding lawn mower, first, locate the choke lever or knob. This is typically located near the throttle control and should be marked “choke” or “start.” Push the lever in the direction indicated (usually up) to engage the choke.

Once you have engaged it, turn your key to start your engine and allow it to warm up for two minutes with the choke engaged before returning it to its original position.

How Do You Start a Lawn Mower for Beginners?

Starting a lawn mower for the first time can be a bit intimidating, but it doesn’t have to be. Begin by reading the owner’s manual and familiarizing yourself with the parts of your mower. Make sure there is enough fuel in the tank and that all safety features are engaged before starting.

Then, set your mower on level ground, insert the key into the ignition switch and turn it clockwise until you hear a click sound. Next, press down on both brake pedals simultaneously while pulling out firmly on the start cord to engage the engine – make sure not to pull too hard as you could damage your machine! Once running, let it warm up for two minutes before engaging any blades or other accessories.

Following these steps will help ensure a safe and smooth start-up experience every time!

What Causes a Riding Lawn Mower Not to Start?

There are several potential causes for a riding lawn mower not to start. The most common is a lack of fuel or stale fuel, which can clog up the carburetor and make it difficult for the engine to start. A dirty air filter can also prevent an engine from starting, as it blocks the flow of oxygen needed to ignite the fuel in the combustion chamber.

If these components are functioning properly, then other possible issues could be related to spark plug failure, bad battery connections, or even faulty wiring. It is important to identify and address each issue before attempting to start your riding lawn mower again.

How to Operate a Riding Lawn Mower (Husqvarna LTG 2654)

How to Start a Riding Lawn Mower That Has Been Sitting

Starting a riding lawn mower that has been sitting for some time is not difficult, but does require a few steps. First, make sure the mower has plenty of fuel and oil in it. Then check to see if the spark plug is sparking by removing it from its socket and attaching it to a grounded metal surface (such as an engine block).

Finally, prime the carburetor with gasoline before attempting to start the engine. With these steps complete, you should be able to easily get your riding lawn mower back up and running!

How to Start a Riding Lawn Mower With a Choke

Starting a riding lawn mower with a choke is an easy process, but it’s important to use the correct technique for safety. Begin by turning off the engine and engaging the parking brake. Then, locate the choke lever, which is usually located near your steering wheel or dashboard.

Pull on the lever to open up the carburetor and allow more air into it. Next, turn on your ignition key and wait until you hear two clicks; this indicates that fuel is being pumped into your engine. Finally, push down on your accelerator pedal until you notice that all of your gauges are in their normal positions before releasing it – at this point, you should be able to start up!

How to Start a Riding Lawn Mower With No

Starting a riding lawn mower can be tricky if you don’t know what to do. It is important to make sure that the battery is fully charged and that all of the safety protocols are followed. To begin, locate the ignition key on your mower and turn it counterclockwise until it clicks into position.

Then press down on the brake pedal before turning the key clockwise to start up your engine. If no sound is heard after multiple attempts, check for any loose wires or other electrical issues that may need attention before trying again.

How to Start a Riding Lawn Mower John Deere

To start a riding lawn mower John Deere, begin by placing the key in the ignition switch. Make sure the parking brake is engaged and then turn it to “On”. Next, move the choke lever up for cold starts or leave it down for warm engine starting.

Pull out on the throttle control handle located near your left foot until you hear it click into position. Finally, depress and hold down the accelerator pedal with your right foot while turning over the starter key with your left hand until you hear the engine running smoothly.


Overall, starting a riding lawn mower can seem daunting at first, but with these tips and tricks, it’s easy to get the job done quickly. Make sure you check all your safety measures before beginning any work on the mower and understand how each part works together in order to keep your yard looking pristine. With patience and practice, anyone can master how to start a riding lawn mower.

Leave a Comment